Plain Encased Seal
Part NamePLAIN ENCASED SEAL
Federal Supply ClassPacking And Gasket Materials
Part Number00044, 17702, 31M24
National Stock Number5330-00-164-8850
Item Name Code4214
- RUBBER SYNTHETIC SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER3.005 INCHES NOMINAL
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.234 INCHES MINIMUM AND
- 0.266 INCHES MAXIMUM
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL
HOUSING BORE DIAMETER2.999 INCHES MINIMUM AND
- 3.002 INCHES MAXIMUM
III TEMP RATING-65.0 DEG FAHRENHEIT AND
- 225.0 DEG FAHRENHEIT
THE MANUFACTURERS DATA
DESIGN CONTROL REFERENCE17702
Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.
Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.
Hazardous Material CodeP
There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metals Code (PMIC)U
Precious Metal type is unknown.
Click the + sign at the end of the row to add another row/part