Part NameBLOCK CLAMP
Federal Supply ClassHardware, Commercial
National Stock Number5340-01-338-2898
Item Name Code37415
OVERALL LENGTH1.300 INCHES MINIMUM AND
- 1.340 INCHES MAXIMUM
OVERALL WIDTH0.480 INCHES MINIMUM AND
- 0.520 INCHES MAXIMUM
OVERALL HEIGHT1.034 INCHES NOMINAL
MATERIALALUMINUM ALLOY 356.0
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4218 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.240 INCHES MINIMUM AND
- 0.260 INCHES MAXIMUM
BLOCK HEIGHT0.517 INCHES NOMINAL
DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER0.255 INCHES NOMINAL
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.880 INCHES NOMINAL
MOUNTING FACILITYUNTHREADED HOLE
MOUNTING HOLE DIAMETER0.229 INCHES MINIMUM AND
- 0.241 INCHES MAXIMUM
MOUNTING HOLE QUANTITY2
CLAMPING HOLE QUANTITY1
CLAMPING HOLE DIAMETER0.794 INCHES NOMINAL SINGLE HOLE
CABLE DIAMETER FOR WHICH DESIGNED0.750 INCHES NOMINAL SINGLE HOLE
Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.
Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.
Hazardous Material CodeP
There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metals Code (PMIC)A
Item does not contain Precious Metal.
Click the + sign at the end of the row to add another row/part