Loading

  • Part Name
    ROTARY SWITCH
  • Federal Supply Class
    Switches
  • NIIN
    001649691
  • Part Number
    10180341-14, 3762LA
  • National Stock Number
    5930-00-164-9691
  • Item Name Code
    2134
Specifications
  • OVERALL HEIGHT
    1.188 INCHES NOMINAL
  • OVERALL WIDTH
    1.188 INCHES NOMINAL
  • INDIVIDUAL SECTION QUANTITY
    2
  • SWITCH CONTACT BASIC DESIGN
    NONPILE-UP SYMMETRICAL
  • STYLE DESIGNATOR
    SQUARE WAFER, PANEL MOUNT
  • OVERALL LENGTH
    2.062 INCHES NOMINAL
  • ROTOR THROUGH CONNECTION QUANTITY
    6 EACH SECTION
  • POLE QUANTITY
    6 EACH SECTION FRONT
  • THROW QUANTITY
    2 EACH SECTION REAR
  • CONTACT SWITCHING ACTION
    BREAKS BEFORE MAKES EACH SECTION REAR
  • CONTACT VOLTAGE RATING IN VOLTS
    125.0 AC AT SEA LEVEL
  • 28.0 DC AT SEA LEVEL
  • CONTACT LOAD CURRENT RATING
    500.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
  • 500.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
  • SWITCH ACTUATOR INDEXING POSITION QUANTITY
    2 SINGLE ACTUATOR
  • SWITCH ACTUATOR POSITIONING INCREMENT
    30.0 DEGREES SINGLE ACTUATOR
  • SWITCH ACTUATOR STOP DEVICE TYPE
    FIXED STOP SINGLE ACTUATOR
  • SHAFT TYPE
    ROUND, FLATTED SINGLE ACTUATOR
  • FIRST FLAT LENGTH
    0.250 INCHES NOMINAL SINGLE ACTUATOR
  • FLAT HEIGHT
    0.211 INCHES MINIMUM AND
  • 0.221 INCHES MAXIMUM SINGLE ACTUATOR
  • SHAFT DIAMETER
    0.247 INCHES MINIMUM AND
  • 0.251 INCHES MAXIMUM SINGLE ACTUATOR
  • SHAFT LENGTH
    0.656 INCHES NOMINAL SINGLE ACTUATOR
  • TERMINAL TYPE
    TAB, SOLDER LUG
  • NONTURN DEVICE TYPE
    SLOTTED BUSHING AT 12:00 O'CLOCK
  • MOUNTING METHOD
    THREADED BUSHING SINGLE MOUNTING FACILITY
  • THREAD SERIES DESIGNATOR
    UNEF SINGLE MOUNTING FACILITY
  • NOMINAL THREAD SIZE
    0.375 INCHES SINGLE MOUNTING FACILITY
  • THREAD CLASS
    2A SINGLE MOUNTING FACILITY
  • THREAD LENGTH
    0.281 INCHES NOMINAL SINGLE MOUNTING FACILITY
  • TEST DATA DOCUMENT
    81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • III SHAFT FLAT/SLOT ANGULAR LOCATION
    180.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
  • III OPERATING TEMP RANGE
    -65.0 TO 125.0 DEG CELSIUS
  • III DETENT ROTATIONAL TORQUE RANGE
    6.000 TO 54.400 INCH-OUNCES SINGLE ACTUATOR
Restrictions
  • Demilitarization Code
    A

    Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.

  • Criticality Code
    X

    Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.

  • Hazardous Material Code
    P

    There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

  • Precious Metals Code (PMIC)
    U

    Precious Metal type is unknown.

Request Quote

Click the + sign at the end of the row to add another row/part