Loading

  • Part Name
    ELECTRICAL RECEPTACLE CONNECTOR
  • Federal Supply Class
    Connectors, Electrical
  • NIIN
    010915398
  • Part Number
    2960-4090, 975936-1, 975936-1, 975936-1
  • National Stock Number
    5935-01-091-5398
  • Item Name Code
    15093
Specifications
  • SHELL SURFACE TREATMENT
    GOLD AND
  • OVERALL LENGTH
    0.710 INCHES NOMINAL
  • CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
    0.250 INCHES NOMINAL
  • OVERALL HEIGHT
    0.527 INCHES NOMINAL
  • OVERALL WIDTH
    0.500 INCHES NOMINAL
  • DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
    0.250 INCHES NOMINAL
  • DISTANCE FROM MOUNTING SHOULDER TO REAR FACE
    0.211 INCHES MINIMUM AND
  • 0.215 INCHES MAXIMUM
  • FLANGE LENGTH
    0.500 INCHES NOMINAL
  • UNTHREADED MOUNTING HOLE DIAMETER
    0.100 INCHES MINIMUM AND
  • 0.106 INCHES MAXIMUM
  • CONNECTOR LOCKING METHOD
    EXTERNALLY THREADED SHELL
  • THREADED DEVICE TYPE
    COUPLING FACILITY
  • THREAD SERIES DESIGNATOR
    UNS
  • NOMINAL THREAD SIZE
    0.250 INCHES
  • THREAD CLASS
    2A
  • THREAD QUANTITY PER INCH
    36
  • THREAD DIRECTION
    RIGHT-HAND
  • SHELL TYPE
    SOLID
  • SHELL MATERIAL
    COPPER ALLOY
  • COPPER
  • SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
    MIL-G-45204,TY 2,GRADE C OR D,CL 2 MIL SPEC 1ST TREATMENT RESPONSE AND
  • MIL-C-14550,CL 4 MIL SPEC 2ND TREATMENT RESPONSE
  • MATING END QUANTITY
    1
  • CONTACT POSITION ARRANGEMENT STYLE
    SMA SINGLE MATING END
  • INSERT MATERIAL
    PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
  • INSERT MATERIAL DOCUMENT AND CLASSIFICATION
    MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
  • INCLUDED CONTACT QUANTITY
    1 SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT REMOVABILITY
    NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
  • INCLUDED CONTACT TYPE
    COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS
    355.0 SINGLE MATING END SINGLE CONTACT GROUPING
  • RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS
    50.0 SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT MATERIAL
    COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT MATERIAL DOCUMENT AND CLASSIFICATION
    QQ-C-530,COND H FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT SURFACE TREATMENT
    GOLD AND
  • COPPER SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
    MIL-G-45204,TY 2,GRADE C OR D,CL 2 MIL SPEC 1ST TREATMENT RESPONSE AND
  • MIL-C-14550,CL 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
  • TERMINAL TYPE
    SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
  • TERMINAL LOCATION
    SIDE SINGLE MATING END SINGLE CONTACT GROUPING
  • ENVIRONMENTAL PROTECTION
    SHOCK RESISTANT AND
  • VIBRATION RESISTANT AND
  • SALT WATER RESISTANT
  • III PRECIOUS MATERIAL
    GOLD
  • III PRECIOUS MATERIAL AND WEIGHT
    0.105 GOLD GRAINS, TROY
  • III PRECIOUS MATERIAL AND LOCATION
    CONTACT AND SHELL SURFACES GOLD
Restrictions
  • Demilitarization Code
    A

    Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.

  • Criticality Code
    X

    Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.

  • Hazardous Material Code
    P

    There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

  • Precious Metals Code (PMIC)
    G

    Item contains gold.

Request Quote

Click the + sign at the end of the row to add another row/part