Electrical Receptacle Connector

Loading

  • Part Name
    ELECTRICAL RECEPTACLE CONNECTOR
  • Federal Supply Class
    Connectors, Electrical
  • NIIN
    001649744
  • Part Number
    2269167-1, 2269167-1, 2379416-1, 8798P1
  • National Stock Number
    5935-00-164-9744
  • Item Name Code
    15093
Specifications
  • III BODY STYLE
    STRAIGHT SHAPE, EXTERNAL COUPLING
  • OVERALL LENGTH
    5.969 INCHES NOMINAL
  • BUSHING DIAMETER
    1.859 INCHES MINIMUM AND
  • 1.891 INCHES MAXIMUM
  • OVERALL HEIGHT
    2.234 INCHES MINIMUM AND
  • 2.266 INCHES MAXIMUM
  • OVERALL WIDTH
    2.234 INCHES MINIMUM AND
  • 2.266 INCHES MAXIMUM
  • CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT
    1.745 INCHES MINIMUM AND
  • 1.755 INCHES MAXIMUM
  • DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH
    1.745 INCHES MINIMUM AND
  • 1.755 INCHES MAXIMUM
  • DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE
    1.406 INCHES NOMINAL
  • UNTHREADED MOUNTING HOLE DIAMETER
    0.211 INCHES MINIMUM AND
  • 0.219 INCHES MAXIMUM
  • CONNECTOR LOCKING METHOD
    EXTERNALLY THREADED SHELL
  • THREADED DEVICE TYPE
    COUPLING FACILITY
  • THREAD SERIES DESIGNATOR
    DOUBLE STUB
  • NOMINAL THREAD SIZE
    1.750 INCHES
  • THREAD CLASS
    2A
  • THREAD QUANTITY PER INCH
    5
  • THREAD DIRECTION
    RIGHT-HAND
  • SHELL TYPE
    SOLID
  • SHELL MATERIAL
    COPPER ALLOY
  • SHELL MATERIAL DOCUMENT AND CLASSIFICATION
    QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
  • SHELL SURFACE TREATMENT
    SILVER
  • SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
    QQ-S-365,TYPE 1,GRADE B FED SPEC SINGLE TREATMENT RESPONSE
  • MATING END QUANTITY
    1
  • CONTACT POSITION ARRANGEMENT STYLE
    NONSTD SINGLE MATING END
  • INSERT MATERIAL
    PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
  • INCLUDED CONTACT QUANTITY
    1 SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT REMOVABILITY
    NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
  • INCLUDED CONTACT TYPE
    COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT MATERIAL
    COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT MATERIAL DOCUMENT AND CLASSIFICATION
    QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT SURFACE TREATMENT
    GOLD SINGLE MATING END SINGLE CONTACT GROUPING
  • CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
    MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
  • TERMINAL TYPE
    SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
  • TERMINAL LOCATION
    BACK SINGLE MATING END SINGLE CONTACT GROUPING
  • ENVIRONMENTAL PROTECTION
    MOISTURE RESISTANT AND
  • SALT WATER RESISTANT AND
  • VIBRATION RESISTANT
  • III PRECIOUS MATERIAL
    GOLD AND
  • SILVER
  • III PRECIOUS MATERIAL AND WEIGHT
    0.0058 GOLD GRAINS, TROY AND
  • 0.100 SILVER GRAINS, TROY
  • III PRECIOUS MATERIAL AND LOCATION
    CONTACT SURFACE GOLD AND
  • SHELL SURFACE SILVER
  • THE MANUFACTURERS DATA
  • MANUFACTURERS CODE
    10001
  • DESIGN CONTROL REFERENCE
    2269167-1
Restrictions
  • Demilitarization Code
    A

    Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.

  • Criticality Code
    X

    Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.

  • Hazardous Material Code
    P

    There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

  • Precious Metals Code (PMIC)
    G

    Item contains gold.

Request Quote

Click the + sign at the end of the row to add another row/part