Paper Plastic Dielectric Metallized Fixed Capacitor

Loading

  • Part Name
    PAPER-PLASTIC DIELECTRIC METALLIZED FIXED CAPACITOR
  • Federal Supply Class
    Capacitors
  • NIIN
    010914562
  • Part Number
    MIL-C-39022/10, M39022/10-G394JR
  • National Stock Number
    5910-01-091-4562
  • Item Name Code
    31959
Specifications
  • BODY LENGTH
    1.562 INCHES NOMINAL
  • CAPACITANCE VALUE PER SECTION
    0.390 MICROFARADS SINGLE SECTION
  • TOLERANCE RANGE PER SECTION
    -5.00 TO 5.00 PERCENT SINGLE SECTION
  • NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
    400.0 DC SINGLE SECTION
  • NONDERATED OPERATING TEMP
    -55.0 DEG CELSIUS MINIMUM AND
  • 85.0 DEG CELSIUS MAXIMUM
  • BODY STYLE
    W/O MTG FACILITIES, AXIAL TERMINALS
  • BODY DIAMETER
    0.562 INCHES NOMINAL
  • SCHEMATIC DIAGRAM DESIGNATOR
    NO COMMON OR GROUNDED ELECTRODE(S)
  • TERMINAL TYPE AND QUANTITY
    2 UNINSULATED WIRE LEAD
  • TERMINAL LENGTH
    1.625 INCHES MINIMUM
  • TERMINAL DIAMETER
    0.032 INCHES NOMINAL
  • CASE MATERIAL
    METAL
  • CASE INSULATION MATERIAL
    PLASTIC
  • INSULATION RESISTANCE AT REFERENCE TEMP
    250000.0 MEGOHMS
  • DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
    0.2500
  • RELIABILITY INDICATOR
    ESTABLISHED
  • RELIABILITY FAILURE RATE LEVEL IN PERCENT
    0.0100
  • FEATURES PROVIDED
    HERMETICALLY SEALED CASE
  • TEST DATA DOCUMENT
    81349-MIL-C-39022 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • SPECIFICATION/STANDARD DATA
    81349-MIL-C-39022/10 GOVERNMENT SPECIFICATION
  • III TERMINAL SURFACE TREATMENT
    SOLDER
  • III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
    25000.0 MEGOHMS
  • SPEC/STD CONTROLLING DATA
  • MANUFACTURERS CODE
    81349
  • NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
    MIL-C-39022/10
  • MANUFACTURERS CODE
    81349
  • DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
    M39022/10-G394JR
Restrictions
  • Demilitarization Code
    A

    Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.

  • Criticality Code
    X

    Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.

  • Hazardous Material Code
    P

    There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

  • Precious Metals Code (PMIC)
    U

    Precious Metal type is unknown.

Request Quote

Click the + sign at the end of the row to add another row/part