Ceramic Dielectric Fixed Capacitor

Loading

  • Part Name
    CERAMIC DIELECTRIC FIXED CAPACITOR
  • Federal Supply Class
    Capacitors
  • NIIN
    013383481
  • Part Number
    CCR75CJ4R7DR, CCR75CJ4R7DS, C33B4R7D, MIL-C-20/27, MIL-PRF-20/27
  • National Stock Number
    5910-01-338-3481
  • Item Name Code
    7
Specifications
  • CAPACITANCE VALUE PER SECTION
    4.700 PICOFARADS SINGLE SECTION
  • TOLERANCE RANGE PER SECTION
    -0.50 TO 0.50 PICOFARADS SINGLE SECTION
  • NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION
    200.0 DC SINGLE SECTION
  • III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS
    0.0 SINGLE SECTION
  • TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS
    -120.0 TO 120.0 SINGLE SECTION
  • NONDERATED OPERATING TEMP
    -55.0 DEG CELSIUS MINIMUM AND
  • 125.0 DEG CELSIUS MAXIMUM
  • BODY STYLE
    W/O MTG FACILITIES, AXIAL TERMINALS
  • BODY DIAMETER
    0.080 INCHES MINIMUM AND
  • 0.100 INCHES MAXIMUM
  • BODY LENGTH
    0.150 INCHES MINIMUM AND
  • 0.170 INCHES MAXIMUM
  • SCHEMATIC DIAGRAM DESIGNATOR
    NO COMMON OR GROUNDED ELECTRODE(S)
  • TERMINAL TYPE AND QUANTITY
    2 UNINSULATED WIRE LEAD
  • TERMINAL LENGTH
    1.250 INCHES MINIMUM
  • TERMINAL DIAMETER
    0.015 INCHES MINIMUM AND
  • 0.021 INCHES MAXIMUM
  • CASE MATERIAL
    PLASTIC
  • INSULATION RESISTANCE AT REFERENCE TEMP
    100000.0 MEGOHMS
  • DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT
    0.150
  • RELIABILITY INDICATOR
    ESTABLISHED
  • RELIABILITY FAILURE RATE LEVEL IN PERCENT
    0.001
  • TEST DATA DOCUMENT
    81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • SPECIFICATION/STANDARD DATA
    81349-MIL-C-20/27 GOVERNMENT SPECIFICATION
  • III TERMINAL SURFACE TREATMENT
    SOLDER
  • III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP
    10000.0 MEGOHMS
  • SPEC/STD CONTROLLING DATA
  • MANUFACTURERS CODE
    81349
  • DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
    CCR75CJ4R7DS
  • MANUFACTURERS CODE
    81349
  • NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE
    MIL-PRF-20/27
Restrictions
  • Demilitarization Code
    A

    Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.

  • Criticality Code
    X

    Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.

  • Hazardous Material Code
    P

    There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.

  • Precious Metals Code (PMIC)
    A

    Item does not contain Precious Metal.

Request Quote

Click the + sign at the end of the row to add another row/part