5910-00-581-8785 Parts Inventory

Ceramic Dielectric Fixed Capacitor
Federal Supply Class Capacitors
National Stock Number 5910-00-581-8785
Item Name Code 00007
Part Numbers CC35LG151C, CC35LG151G, DMS 80047B, MILC20-11
Serial Number 005818785
Specifications
CAPACITANCE VALUE PER SECTION 150.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 500.0 DC SINGLE SECTION
III TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS -80.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND
85.0 DEG CELSIUS MAXIMUM
BODY STYLE W/O MTG FACILITIES, RADIAL TERMINALS
BODY DIAMETER 0.270 INCHES NOMINAL
BODY LENGTH 1.115 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL HEIGHT FROM BODY 1.250 INCHES NOMINAL
CASE MATERIAL CERAMIC
INSULATION RESISTANCE AT REFERENCE TEMP 50000.0 MEGOHMS
QUALITY FACTOR AT REFERENCE TEMP 1000.0000
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
III TERMINAL SURFACE TREATMENT SOLDER
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 1000.0 MEGOHMS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC20-11
Restrictions
Demilitarization Code A Items subject to the Export Administration Regulations (EAR) in parts 773-74 of Title 15, Code of Federal Regulations (CFR) (CCLI or EAR99) and determined by the DoD to present a low risk when released out of DoD control. No DEMIL, MUT or end use certificate is required. May require an export license from DOC.
Criticality Code X Does not have a nuclear hardened feature or other critical feature such as tolerance, fit restriction or application.
Hazardous Materials Code P There is no information in the HMIRS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metals Code (PMIC) U Precious Metal type is unknown.

Request Quote

  • Click the + sign at the end of the row to add another row/part
  • NSN Number 
  • Part NumberDescription 
  • QtyCondition